bună ziua, am în prezent probleme cu presa mea de pastile tdp-5, în prezent presez pastile mdma/ectasy, problema cu care mă confrunt este că unele pastile vor ieși bine, altele 10 vor ieși bine, apoi 10 vor ieși stricate sau rupte, am încercat totul, de la amestecuri diferite la reglarea mașinii, mă întreb dacă nu cumva problema este umiditatea din cameră este prea mare și provoacă aglomerări în interiorul încărcătorului, iar ajutorul ar fi foarte apreciat
Ce amestecuri ați folosit? Cum le-ați amestecat cu mdma? Ați uscat mdma în mod corespunzător? Ce raport ați încercat să presați fără mdma? Etc etc.. am nevoie de mult mai multe informații pentru a analiza problema.
Este ca și cum: am o mașină, pun combustibil în ea, într-o zi merge bine, a doua zi nu... care este problema...
Este ca și cum: am o mașină, pun combustibil în ea, într-o zi merge bine, a doua zi nu... care este problema...
HI everyone im new to pill pressing i havent even started im lloking to make xtc pills do you guys know a recipe can i buy binding agent online i saw one it has all the mixes with color too , how much mdma should i mix with the binder ,p.s( example 10 GR mdma how many pills can it make ) best regards
i have experience using a tdp1..5
msm is a great filler mixed with a small amount of micreocrystaline cellulose
you will need to make a batch of powder up without any active chem in it
make sure to set the bottom die setting so it presses to the bottom of the press and not on the cam at the top or it will break the machine
you will need to adjust the main punch out a bit and roll the machine by hand fairly hard so it stops on the pill...then adjust by hand the screw out so it will just keep rolling...this is to set the machine for maximum compression...there are vids how to do this on youtube
then you can weigh the pill that has been pressed and do your maths how much of your binder and active chem ratio needs to be
msm is a great filler mixed with a small amount of micreocrystaline cellulose
you will need to make a batch of powder up without any active chem in it
make sure to set the bottom die setting so it presses to the bottom of the press and not on the cam at the top or it will break the machine
you will need to adjust the main punch out a bit and roll the machine by hand fairly hard so it stops on the pill...then adjust by hand the screw out so it will just keep rolling...this is to set the machine for maximum compression...there are vids how to do this on youtube
then you can weigh the pill that has been pressed and do your maths how much of your binder and active chem ratio needs to be
I had same thing happened when I was a beginner for pressing pills.
the only the matter is the compounding agent and your ratio for mixture of MDMA and the compounding agent.
Let me know your ratio of this compounding agent and active ingredient that you have and I will help you out to solve this issues.
the only the matter is the compounding agent and your ratio for mixture of MDMA and the compounding agent.
Let me know your ratio of this compounding agent and active ingredient that you have and I will help you out to solve this issues.