Здравейте, в момента имам проблеми с моята преса за хапчета tdp-5, в момента пресовам хапчета mdma/ectasy, проблемът ми е, че някои хапчета излизат добре, а други 10 излизат добре, после 10 излизат разхвърляни или счупени, опитах всичко - от различни смеси до регулиране на машината, чудя се дали проблемът не е във влажността в стаята, която е твърде висока и причинява струпване в зареждащия механизъм, а помощта би била много ценна.
Какви смеси сте използвали? Как го смесихте с вашата мдма? Изсушихте ли правилно вашата мдма? В какво съотношение се опитахте да пресовате без mdma? И т.н. и т.н. Нужна е много повече информация, за да се разгледа проблемът.
Това е като: имам кола, наливам гориво, един ден върви добре, на следващия не... какъв е проблемът...
Това е като: имам кола, наливам гориво, един ден върви добре, на следващия не... какъв е проблемът...
HI everyone im new to pill pressing i havent even started im lloking to make xtc pills do you guys know a recipe can i buy binding agent online i saw one it has all the mixes with color too , how much mdma should i mix with the binder ,p.s( example 10 GR mdma how many pills can it make ) best regards
i have experience using a tdp1..5
msm is a great filler mixed with a small amount of micreocrystaline cellulose
you will need to make a batch of powder up without any active chem in it
make sure to set the bottom die setting so it presses to the bottom of the press and not on the cam at the top or it will break the machine
you will need to adjust the main punch out a bit and roll the machine by hand fairly hard so it stops on the pill...then adjust by hand the screw out so it will just keep rolling...this is to set the machine for maximum compression...there are vids how to do this on youtube
then you can weigh the pill that has been pressed and do your maths how much of your binder and active chem ratio needs to be
msm is a great filler mixed with a small amount of micreocrystaline cellulose
you will need to make a batch of powder up without any active chem in it
make sure to set the bottom die setting so it presses to the bottom of the press and not on the cam at the top or it will break the machine
you will need to adjust the main punch out a bit and roll the machine by hand fairly hard so it stops on the pill...then adjust by hand the screw out so it will just keep rolling...this is to set the machine for maximum compression...there are vids how to do this on youtube
then you can weigh the pill that has been pressed and do your maths how much of your binder and active chem ratio needs to be
I had same thing happened when I was a beginner for pressing pills.
the only the matter is the compounding agent and your ratio for mixture of MDMA and the compounding agent.
Let me know your ratio of this compounding agent and active ingredient that you have and I will help you out to solve this issues.
the only the matter is the compounding agent and your ratio for mixture of MDMA and the compounding agent.
Let me know your ratio of this compounding agent and active ingredient that you have and I will help you out to solve this issues.