hello im currently having issues with my tdp-5 pill press im currently pressing mdma/ectasy pills my issue im running into is some pills will come out fine ill have like 10 come out fine then 10 come out messed up or broken ive tried everything from different mixes to adjusting the machine im wondering if maybe the issue is the humidity in the room is to high and is causing clumping inside the loader and help would be greatly appreciated
What mixes did you use? How you mixed it with your mdma? Did you dry your mdma properly? What ratio’s, you tried to press without mdma? Etc etc.. need a lot more information to look into the problem.
This is like: i have a car, put fuel in it, one day it runs fine, the next day not.. what is the problem…
This is like: i have a car, put fuel in it, one day it runs fine, the next day not.. what is the problem…
HI everyone im new to pill pressing i havent even started im lloking to make xtc pills do you guys know a recipe can i buy binding agent online i saw one it has all the mixes with color too , how much mdma should i mix with the binder ,p.s( example 10 GR mdma how many pills can it make ) best regards
i have experience using a tdp1..5
msm is a great filler mixed with a small amount of micreocrystaline cellulose
you will need to make a batch of powder up without any active chem in it
make sure to set the bottom die setting so it presses to the bottom of the press and not on the cam at the top or it will break the machine
you will need to adjust the main punch out a bit and roll the machine by hand fairly hard so it stops on the pill...then adjust by hand the screw out so it will just keep rolling...this is to set the machine for maximum compression...there are vids how to do this on youtube
then you can weigh the pill that has been pressed and do your maths how much of your binder and active chem ratio needs to be
msm is a great filler mixed with a small amount of micreocrystaline cellulose
you will need to make a batch of powder up without any active chem in it
make sure to set the bottom die setting so it presses to the bottom of the press and not on the cam at the top or it will break the machine
you will need to adjust the main punch out a bit and roll the machine by hand fairly hard so it stops on the pill...then adjust by hand the screw out so it will just keep rolling...this is to set the machine for maximum compression...there are vids how to do this on youtube
then you can weigh the pill that has been pressed and do your maths how much of your binder and active chem ratio needs to be
I had same thing happened when I was a beginner for pressing pills.
the only the matter is the compounding agent and your ratio for mixture of MDMA and the compounding agent.
Let me know your ratio of this compounding agent and active ingredient that you have and I will help you out to solve this issues.
the only the matter is the compounding agent and your ratio for mixture of MDMA and the compounding agent.
Let me know your ratio of this compounding agent and active ingredient that you have and I will help you out to solve this issues.