Tere im praegu on probleeme minu tdp-5 pill press im praegu vajutades mdma /ectasy pillid minu probleem im töötab on mõned pillid tulevad välja trahvi ill on nagu 10 tulevad välja trahvi siis 10 tulevad välja segi või katki ive proovinud kõike erinevate segude reguleerimine masin im mõtlesin, kui äkki probleem on niiskus ruumis on liiga kõrge ja põhjustab klompimine sees laadur ja abi oleks väga teretulnud
Milliseid segusid te kasutasite? Kuidas te segasite seda mdma? Kas te kuivatasite oma mdma korralikult? Millises vahekorras, proovisite pressida ilma mdma-ta? jne jne... vaja palju rohkem teavet, et uurida probleemi.
See on nagu: mul on auto, panen sinna kütust, ühel päeval jookseb hästi, järgmisel päeval mitte... mis on probleem...
See on nagu: mul on auto, panen sinna kütust, ühel päeval jookseb hästi, järgmisel päeval mitte... mis on probleem...
HI everyone im new to pill pressing i havent even started im lloking to make xtc pills do you guys know a recipe can i buy binding agent online i saw one it has all the mixes with color too , how much mdma should i mix with the binder ,p.s( example 10 GR mdma how many pills can it make ) best regards
i have experience using a tdp1..5
msm is a great filler mixed with a small amount of micreocrystaline cellulose
you will need to make a batch of powder up without any active chem in it
make sure to set the bottom die setting so it presses to the bottom of the press and not on the cam at the top or it will break the machine
you will need to adjust the main punch out a bit and roll the machine by hand fairly hard so it stops on the pill...then adjust by hand the screw out so it will just keep rolling...this is to set the machine for maximum compression...there are vids how to do this on youtube
then you can weigh the pill that has been pressed and do your maths how much of your binder and active chem ratio needs to be
msm is a great filler mixed with a small amount of micreocrystaline cellulose
you will need to make a batch of powder up without any active chem in it
make sure to set the bottom die setting so it presses to the bottom of the press and not on the cam at the top or it will break the machine
you will need to adjust the main punch out a bit and roll the machine by hand fairly hard so it stops on the pill...then adjust by hand the screw out so it will just keep rolling...this is to set the machine for maximum compression...there are vids how to do this on youtube
then you can weigh the pill that has been pressed and do your maths how much of your binder and active chem ratio needs to be
I had same thing happened when I was a beginner for pressing pills.
the only the matter is the compounding agent and your ratio for mixture of MDMA and the compounding agent.
Let me know your ratio of this compounding agent and active ingredient that you have and I will help you out to solve this issues.
the only the matter is the compounding agent and your ratio for mixture of MDMA and the compounding agent.
Let me know your ratio of this compounding agent and active ingredient that you have and I will help you out to solve this issues.