hej jeg har i øjeblikket problemer med min tdp-5 pillepresse jeg presser i øjeblikket mdma/ectasy-piller mit problem jeg løber ind i er, at nogle piller kommer fint ud jeg har som 10 kommer fint ud så 10 kommer ødelagt eller ødelagt jeg har prøvet alt fra forskellige blandinger til justering af maskinen jeg spekulerer på, om problemet måske er fugtigheden i rummet er for høj og forårsager klumpning inde i læsseren og hjælp ville være meget værdsat
Hvilke blandinger brugte du? Hvordan blandede du det med din mdma? Tørrede du din mdma ordentligt? Hvilke forhold prøvede du at presse uden mdma? Etc etc... har brug for meget mere information for at undersøge problemet.
Det er ligesom: Jeg har en bil, fylder brændstof i den, den ene dag kører den fint, den næste dag ikke ... hvad er problemet ...
Det er ligesom: Jeg har en bil, fylder brændstof i den, den ene dag kører den fint, den næste dag ikke ... hvad er problemet ...
HI everyone im new to pill pressing i havent even started im lloking to make xtc pills do you guys know a recipe can i buy binding agent online i saw one it has all the mixes with color too , how much mdma should i mix with the binder ,p.s( example 10 GR mdma how many pills can it make ) best regards
i have experience using a tdp1..5
msm is a great filler mixed with a small amount of micreocrystaline cellulose
you will need to make a batch of powder up without any active chem in it
make sure to set the bottom die setting so it presses to the bottom of the press and not on the cam at the top or it will break the machine
you will need to adjust the main punch out a bit and roll the machine by hand fairly hard so it stops on the pill...then adjust by hand the screw out so it will just keep rolling...this is to set the machine for maximum compression...there are vids how to do this on youtube
then you can weigh the pill that has been pressed and do your maths how much of your binder and active chem ratio needs to be
msm is a great filler mixed with a small amount of micreocrystaline cellulose
you will need to make a batch of powder up without any active chem in it
make sure to set the bottom die setting so it presses to the bottom of the press and not on the cam at the top or it will break the machine
you will need to adjust the main punch out a bit and roll the machine by hand fairly hard so it stops on the pill...then adjust by hand the screw out so it will just keep rolling...this is to set the machine for maximum compression...there are vids how to do this on youtube
then you can weigh the pill that has been pressed and do your maths how much of your binder and active chem ratio needs to be
I had same thing happened when I was a beginner for pressing pills.
the only the matter is the compounding agent and your ratio for mixture of MDMA and the compounding agent.
Let me know your ratio of this compounding agent and active ingredient that you have and I will help you out to solve this issues.
the only the matter is the compounding agent and your ratio for mixture of MDMA and the compounding agent.
Let me know your ratio of this compounding agent and active ingredient that you have and I will help you out to solve this issues.