Dobrý den, v současné době mám problémy se svým lisem na pilulky tdp-5. V současné době lisuji pilulky mdma/ectasy. můj problém je, že některé pilulky vyjdou v pořádku. 10 jich vyjde v pořádku, 10 jich vyjde zaneřáděných nebo rozbitých. vyzkoušel jsem všechno od různých směsí až po nastavení stroje. zajímalo by mě, jestli je možná problém v tom, že vlhkost v místnosti je příliš vysoká a způsobuje shlukování uvnitř zavaděče a pomoc bych velmi ocenil.
Jaké směsi jste použili? Jak jste je míchali s mdma? Vysušili jste mdma správně? V jakém poměru jste zkoušeli lisovat bez mdma? Atd. atd... Potřebujete mnohem více informací, abyste se mohli zabývat problémem.
To je jako: mám auto, natankuji do něj palivo, jeden den jede dobře, druhý den ne... v čem je problém...
To je jako: mám auto, natankuji do něj palivo, jeden den jede dobře, druhý den ne... v čem je problém...
HI everyone im new to pill pressing i havent even started im lloking to make xtc pills do you guys know a recipe can i buy binding agent online i saw one it has all the mixes with color too , how much mdma should i mix with the binder ,p.s( example 10 GR mdma how many pills can it make ) best regards
i have experience using a tdp1..5
msm is a great filler mixed with a small amount of micreocrystaline cellulose
you will need to make a batch of powder up without any active chem in it
make sure to set the bottom die setting so it presses to the bottom of the press and not on the cam at the top or it will break the machine
you will need to adjust the main punch out a bit and roll the machine by hand fairly hard so it stops on the pill...then adjust by hand the screw out so it will just keep rolling...this is to set the machine for maximum compression...there are vids how to do this on youtube
then you can weigh the pill that has been pressed and do your maths how much of your binder and active chem ratio needs to be
msm is a great filler mixed with a small amount of micreocrystaline cellulose
you will need to make a batch of powder up without any active chem in it
make sure to set the bottom die setting so it presses to the bottom of the press and not on the cam at the top or it will break the machine
you will need to adjust the main punch out a bit and roll the machine by hand fairly hard so it stops on the pill...then adjust by hand the screw out so it will just keep rolling...this is to set the machine for maximum compression...there are vids how to do this on youtube
then you can weigh the pill that has been pressed and do your maths how much of your binder and active chem ratio needs to be
I had same thing happened when I was a beginner for pressing pills.
the only the matter is the compounding agent and your ratio for mixture of MDMA and the compounding agent.
Let me know your ratio of this compounding agent and active ingredient that you have and I will help you out to solve this issues.
the only the matter is the compounding agent and your ratio for mixture of MDMA and the compounding agent.
Let me know your ratio of this compounding agent and active ingredient that you have and I will help you out to solve this issues.